IBM 4851 514 Service Guide - Page 41
integration
![]() |
View all IBM 4851 514 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Updated October, 2008 Mounting the SurePOS 500 Model 514 B A Figure 18. Sliding the fence off of the integration tray b. Drill the four mounting holes and cut a hole in the countertop for cables, if needed. Use Figure 16 on page 24 or the openings in the integration tray as a pattern for drilling mounting holes and a cable opening in the counter. See Figure 19 on page 26 for reference. c. Remove the four rubber feet located on the bottom of the integration tray. See Figure 19 on page 26 for the location of the feet. d. Attach the integration tray to the countertop using four mounting screws, one at each corner of tray. The four mounting screws are not provided with the kit. Use 60-mm (0.25-in.), pan-head screws. e. Reattach the fence to the integration tray. Chapter 3. Mounting the SurePOS 500 Model 514 25
![](/manual_guide/products/ibm-4851-514-service-guide-fdcec3e/41.png)