IBM 4851 514 Service Guide - Page 92
bracket, removing, replacing
View all IBM 4851 514 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Removing and replacing FRUs Updated October, 2008 Figure 62. Hinge assembly HDD and bracket - removing and replacing Attention: The HDD is a static-sensitive device. See "Handling static-sensitive devices" on page 54. 1. Tilt back the tablet. 2. Remove the HDD front cover as described at "HDD cover - removing and replacing" on page 73. 3. Remove the HDD power connector and data cable connector. 4. Remove the HDD and bracket assembly by loosening the two thumbscrews A in Figure 63 and rotate the bottom of the HDD away from the frame. Figure 63. HDD replacement 5. Remove the HDD D from the bracket C by removing four screws B . 76 SurePOS 500 Model 514
HDD
and
bracket
–
removing
and
replacing
Attention:
The
HDD
is
a
static-sensitive
device.
See
“Handling
static-sensitive
devices”
on
page
54.
1.
Tilt
back
the
tablet.
2.
Remove
the
HDD
front
cover
as
described
at
“HDD
cover
–
removing
and
replacing”
on
page
73.
3.
Remove
the
HDD
power
connector
and
data
cable
connector.
4.
Remove
the
HDD
and
bracket
assembly
by
loosening
the
two
thumbscrews
±A²
in
Figure
63
and
rotate
the
bottom
of
the
HDD
away
from
the
frame.
5.
Remove
the
HDD
±D²
from
the
bracket
±C²
by
removing
four
screws
±B²
.
Figure
62.
Hinge
assembly
Figure
63.
HDD
replacement
Removing
and
replacing
FRUs
Updated
October,
2008
76
SurePOS
500
Model
514