IBM 4851 514 Service Guide - Page 76
Front, bezel, assembly, removing, replacing
View all IBM 4851 514 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Removing and replacing FRUs Updated October, 2008 Figure 45. Removing the LCD assembly 4. Remove the EMC shields covering the backlight card and the tablet touch card. See Figure 42 on page 57. 5. Disconnect and remove the backlight card and the tablet touch card and set aside for use with the new LCD assembly. 6. Remove the six screws holding the LCD assembly ( E in Figure 45) and lift to remove. 7. To replace, reverse these steps. Front bezel assembly - removing and replacing Follow these instructions to replace the front bezel assembly: 1. Remove the tablet as described in "Display tablet - removing and replacing" on page 55. 2. Remove the tablet rear as described in "Display tablet back cover" on page 55. 3. Disconnect the front-bezel-assembly cable ( G in Figure 45). 4. Remove the six screws holding the LCD assembly and lift to remove. 5. Remove the front bezel assembly ( F in Figure 45). 6. To replace, reverse these steps. 60 SurePOS 500 Model 514