IBM 4851 514 Service Guide - Page 95
Mounting, removal, replacement, Integrated, customer, display, removing, replacing, drawer, Full-
View all IBM 4851 514 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Updated October, 2008 Removing and replacing FRUs Mounting foot- removal and replacement Note: The base plate is not present when a mounting foot is used. The mounting foot allows you to sit Model 514 on a cash drawer without an integration tray. 1. Remove the base plate, see "Base plate - removal and replacement" on page 77. 2. Install the mounting foot. Figure 65. Mounting foot Integrated customer display - removing and replacing See "Installing the integrated customer display" on page 9 and reverse the procedures to remove. Cash drawer FRUs - removing and replacing This section describes how to remove and replace both full-size and compact cash drawer-related FRUs. It also contains removal and replacement procedures that are common to both cash drawers. Full-size cash drawer FRUs - removing and replacing This section describes how to remove and replace full-size cash drawer-related FRUs. Removing and replacing a full-size drawer To remove a full size cash drawer: 1. If the cash drawer is mounted to the underside of a counter, refer to the instructions that came with the mounting brackets. 2. Switch OFF the power to the SurePOS 500 Model 514. Unplug the system power cord from the external power source. 3. Open the cash-drawer rear cover. 4. Unplug the cable from the rear of the cash drawer. Chapter 5. Removing and replacing FRUs 79