IBM 4851 514 Service Guide - Page 52
Installing, keyboard-integration, drawer
View all IBM 4851 514 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Mounting the SurePOS 500 Model 514 Updated October, 2008 2) If you are routing cables on top of the counter, route them out the back of the system. Lay them flat along the countertop. 5. Remove the rear cover on the cash drawer. While pressing in on the two buttons located on the sides of the cash drawer, pull back on the rear cover back to remove it. Discard this rear cover. A new rear cover is used for installation of the keyboard integration kit. 6. Install the keyboard-integration tray on a cash drawer: G F E D B A C Figure 27. Installing the keyboard-integration tray on a cash drawer a. Tilt the integration tray down so the three tabs B align with the three tab holes C on the cash drawer as shown in Figure 27. Set the integration tray down on the cash drawer while aligning the screw holes D with holes on the cash drawer. b. Secure the integration tray to the cash drawer with two screws at location D. 7. Place the plastic insulator plate E on the integration tray while aligning the cutout and the four screw holes. 8. Attach the mounting plate F to the integration tray with four plastic washers and screws as shown in Figure 27. 9. Attach the fence G to the integration tray with six small screws. 36 SurePOS 500 Model 514