IBM 4851 514 Service Guide - Page 98
Removing, replacing, keylock, assembly
View all IBM 4851 514 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Removing and replacing FRUs Cover Latches Updated October, 2008 Figure 68. Removing and replacing the top cover Removing and replacing the keylock assembly To remove the keylock assembly: 1. Remove the cash drawer "Removing and replacing a full-size drawer" on page 79). 2. Remove the lock retainer clip holding the keylock assembly on the inside of the drawer (see Figure 69). 3. Slide the keylock assembly out of the front of the drawer. Note: It might require some force to free the keylock assembly. Lock Actuator Rod Lock Retainer Clip Figure 69. Keylock assembly To replace the keylock assembly: 1. Ensure that the lock actuator rod is in the position shown in Figure 69. 2. Slide the lock assembly all the way into the opening in the front of the drawer, making sure that the end of the lock actuator rod is interlocked with the rear of the lock. 82 SurePOS 500 Model 514