Icom IC-80AD Instruction Manual - Page 106
Selecting memory/bank, name indication
![]() |
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
9 MEMORY/CALL CHANNELS [EXAMPLE]: Programming the bank name "AIR" into the scan edge channel 3A. During memory mode, rotate to select scan edge channel 3A. Rotate to enter "A," then push . Push and hold for 1 sec. Enter "I" and "R" with and . Enter select memory write mode. Push to select "B NAME*2." Push and hold for 1 sec. to program. Select "M NAME" or "S NAME*1" when programming the memory name or the scan name, respectively. *1 S NAME can be set for scan edge channels only. *2 B NAME can be set for bank assigned channels only. 98 N Selecting memory/bank name indication During memory mode operation, either the programmed memory name or bank name can be displayed. q Push [M/CALL] to select memory mode. w Push and hold [M.N](6) to select display indication type from memory name, bank name and OFF. • While pushing and holding [M.N](6), rotating [DIAL] is also available. (Name indication OFF Memory Name indication Bank name indication) Name indication OFF [DIAL] Memory name indication Bank name indication Push Channel indication disappears Bank channel is displayed. NOTE: The programmed scan name is displayed during the programmed scan selection.
![](/manual_guide/products/icom-ic80ad-instruction-manual-e055bf3/106.png)