Icom IC-80AD Instruction Manual - Page 57
Received call sign
![]() |
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
N Received call sign When a call is received in DV mode, the calling station and the repeater call signs being used can be stored into the received call record. The stored call signs are viewable in the following manner. Up to 20 calls can be recorded. D Desired call record indication q Enter RX call sign screen. MENU ¶ RX CAL (Push [MENU ]), (Push [ ](2)/[ ](8), then push [ ](5).) • RX call sign screen is displayed. w Push [ ](2) or [ ](8) to select the desired record channel. e To confirm the received call, push [ ](5) several times to select the desired call sign from CALLER, / (CALLER's note), CALLED, RXRPT1 and RXRPT2. CALLER : The station call sign that made the call. / : 4 character note with call sign that made the call. CALLED : The station call sign called by the caller. RXRPT1 : The repeater call sign used by the caller station in the same zone, or gateway repeater call sign of the down link repeater when the caller station is in a different zone. RXRPT2 : The repeater call sign for down link repeater. r Push [MENU ] to return to frequency indication. For your information When receiving a call, the received station call sign is automatically displayed and scrolled in sequence on the frequency display. This can be turned OFF in DISP set mode. (p.134) DV MODE OPERATION 7 1 Call record channel 2 3 4 5 6 7 8 9 Push 10 11 12 13 14 15 NOTE: When a call is received in DV mode when the power save function is activated, the call sign may not be 16 received correctly. 17 This is normal, not a malfunction, because the call sign information cannot be detected during power save. 18 Turn the power save function OFF (p. 125) if you want to 19 receive a call sign correctly even in stand-by operation. 49
![](/manual_guide/products/icom-ic80ad-instruction-manual-e055bf3/57.png)