Icom IC-80AD Instruction Manual - Page 97
Alarm area 2
![]() |
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
8 GPS/GPS-A OPERATION D Alarm area 2 Selects GPS alarm active range from "BOTH," "EXTEND" and "LIMIT" when "CH" or "RX" is selected at GPS alarm setting. q Enter "ALM2" in GPS mode. MENU ¶ GPS ¶ ALM2 (Push [MENU ]), (Push [ ](2)/[ ](8), then push [ ](5).) • ALM2 setting screen is displayed. • Example: Your position 1 2 Extended range 3 (approx. 1 km; 1094 Y) 4 5 6 Limited range 7 (approx. 500 m; 547 Y) 8 w Push [ ](2) or [ ](8) to select the desired alarm setting, The target position definitions for Alarm area 2. 9 then push [ ](5) to set. 10 • BOTH : GPS alarm† will sound when a target position enters both 500 m* (547 Y)* and 1 km* (1094 Y)* range. (default) • EXTEND : GPS alarm‡ will sound when a target position enters 1 km* (1094 Y)* range. Alarm indication 11 When a target position comes into the alarm area, below indication appears. 12 13 • LIMITE : GPS alarm‡ will sound when a target position enters 500 m* (547 Y)* range. 14 *Approximate † One beep sounds when coming within 1 km (1094 Y) and three beep sounds when coming within 500 m (547 Y). 15 Appears 16 ‡ Three beep sounds. e Push [MENU ] to return to frequency indication. • Push any key to return to frequency indication, but "S" indica- 17 tor continues to blink in the area. 18 19 89
![](/manual_guide/products/icom-ic80ad-instruction-manual-e055bf3/97.png)