Icom IC-80AD Instruction Manual - Page 80
Break-in communication
![]() |
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
7 DV MODE OPERATION N Break-in communication The break-in function allows you to break into a conversation, where the two original stations are communicating with call sign squelch enabled. q While receiving an another station's communication, push and hold [RX©CS](8) for 1 sec. to set the communicating station's call sign. • When a call sign has not been received correctly, error beeps sound and no call sign is set. Try to set the call sign of a communicating signal again, or set the call sign manually. w Enter "BK" in DV SET mode. MENU ¶ DV SET ¶ BK (Push [MENU ]), (Push [ ](2)/[ ](8), then push [ ](5).) • BK screen is displayed. e Push [ ](2) or [ ](8) to turn the Break-in function ON and OFF. • When "ON" is selected, "BK" appears instead of memory chan- nel indication r Push [ ](5). • Returns to DV SET mode. t Push [MENU ] to return to frequency indication. "BK" appears y When both stations are in standby, push [PTT] to transmit a break-in call. • The programmed call sign station receives the break-in call as well as your call sign. u Wait for the reply call from the station who receives the break-in call. i After receiving the reply call, communicate normally. o To cancel the break-in function, turn the Break-in function OFF in the DV SET mode as steps w to t. NOTE: The break-in function is turned OFF automatically when turning transceiver's power OFF 72
![](/manual_guide/products/icom-ic80ad-instruction-manual-e055bf3/80.png)