Icom IC-80AD Instruction Manual - Page 160
DTCS polarity setting, Tone scan
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
13 OTHER FUNCTIONS N DTCS polarity setting q Enter "DTCS-P" in DUP.T set mode. MENU ¶ DUP.T ¶ DTCS-P (p. 120) (Push [MENU ]), (Push [ ](2)/[ ](8), then push [ ](5).) w Push [ ](2) or [ ](8) to select the desired DTCS polarity mode. • BOTH N : Normal phase is used for both TX and RX. (Default) • TN-RR : Normal phase is used for TX; Reverse phase for RX. • TR-RN : Reverse phase is used for TX; Normal phase for RX. • BOTH R : Reverse phase is used for both TX and RX. e Push [ ](5) (or [ ](4)) to return to DUP.T set mode, and push [MENU ] to return to frequency indication. 152 N Tone scan The transceiver can detect the subaudible tone frequency and DTCS code in a received signal. By monitoring a signal that is being transmitted on a repeater input frequency, you can determine the tone frequency required to access the repeater. q Set the desired frequency on FM/FM-N mode or memory channel to be checked for a tone frequency or DTCS code. w Push and hold [TONE](7) for 1 sec. several times to activate the repeater tone, tone squelch or DTCS squelch. (T, T SQL or DTCS) • Rotating [DIAL] while pushing and holding [TONE](7) also selects the tone functions. e Push and hold [T.SCAN](9) for 1 sec. to start the tone scan. • To change the scanning direction, rotate [DIAL]. r When the tone frequency or DTCS code is decoded, the set mode contents are programmed with the frequency or code. • The tone scan pauses for the set period in scan pause timer (p. 121) when a tone frequency or DTCS code is detected. • The decoded tone frequency is used for the repeater tone frequency when the tone squelch is OFF. • The decoded tone frequency is used for the tone squelch frequency when the tone squelch is ON. • The decoded DTCS code is used for the DTCS squelch code when the DTCS squelch is ON.