Icom IC-80AD Instruction Manual - Page 107

Copying memory/call contents

Page 107 highlights

9 MEMORY/CALL CHANNELS N Copying memory/call contents 1 This function transfers a memory channel's contents to VFO (or another memory/call channel). This is useful when searching for signals around a memory channel frequency and for recalling the offset frequency, subaudible tone frequency etc. D Memory/call¶VFO q Select the memory (call) channel to be copied. Pushing and holding [S.MW](M/CALL) for 2 sec. at step 2 w, will also copy the memory contents to VFO. In this case, steps e and r are not necessary. 3 4 D Memory/call¶memory/call 5 q Select the memory (call) channel to be copied. ± Push [M/CALL] several times to select memory mode 6 ± Push [M/CALL] several times to select memory mode or call channel mode, then rotate [DIAL] to select the desired channel. or call channel mode, then rotate [DIAL] to select the 7 desired memory channel. w Push and hold [S.MW](M/CALL) for 1 sec. to enter select 8 w Push and hold [S.MW](M/CALL) for 1 sec. to enter select memory write mode. 9 memory write mode. • 1 short and 1 long beep sound. • 1 short and 1 long beep sound. • " " indication and memory channel number blink. 10 • " " indication and memory channel number blink. e Rotate [DIAL] to select "VFO." r Push and hold [S.MW](M/CALL) for 1 sec. to write the se- • Do not hold [S.MW](M/CALL) for more than 2 sec. otherwise the 11 memory contents will be copied to VFO. e Rotate [DIAL] to select the target memory (call) channel. 12 lected channel contents to VFO mode. • Returns to VFO mode automatically. r Push and hold [S.MW](M/CALL) for 1 sec. again to copy. 13 14 [DIAL] [EXAMPLE]: Copying memory channel 11 to VFO. 15 Push and hold for 1 sec. Rotate to select "VFO." Push and hold for 1 sec. 16 17 Memory mode Enter select memory write mode. 18 "VFO" is selected. Return to the VFO mode. 19 99

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188

99
9
MEMORY/CALL CHANNELS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Copying memory/call contents
This function transfers a memory channel’s contents to VFO
(or another memory/call channel). This is useful when search-
ing for signals around a memory channel frequency and for
recalling the offset frequency, subaudible tone frequency etc.
D
Memory/call
VFO
q
Select the memory (call) channel to be copied.
Push
[M/CALL]
several times to select memory mode
or call channel mode, then rotate
[DIAL]
to select the
desired channel.
w
Push and hold
[S.MW]
(M/CALL) for 1 sec. to enter select
memory write mode.
• 1 short and 1 long beep sound.
• “
” indication and memory channel number blink.
e
Rotate
[DIAL]
to select “VFO.”
r
Push and hold
[S.MW]
(M/CALL) for 1 sec. to write the se-
lected channel contents to VFO mode.
• Returns to VFO mode automatically.
Pushing and holding
[S.MW]
(M/CALL) for 2 sec. at step
w
, will also copy the memory contents to VFO. In this
case, steps
e
and
r
are not necessary.
D
Memory/call
memory/call
q
Select the memory (call) channel to be copied.
Push
[M/CALL]
several times to select memory mode
or call channel mode, then rotate
[DIAL]
to select the
desired memory channel.
w
Push and hold
[S.MW]
(M/CALL) for 1 sec. to enter select
memory write mode.
• 1 short and 1 long beep sound.
• “
” indication and memory channel number blink.
Do not hold
[S.MW]
(M/CALL) for more than 2 sec. otherwise the
memory contents will be copied to VFO.
e
Rotate
[DIAL]
to select the target memory (call) channel.
r
Push and hold
[S.MW]
(M/CALL) for 1 sec. again to copy.
[DIAL]
Memory mode
Enter
select memory write mode.
to select “VFO.”
Rotate
Push and hold
for 1 sec.
“VFO” is selected.
Return to the VFO mode.
Push and hold
for 1 sec.
[EXAMPLE]:
Copying memory channel 11 to VFO.