Icom IC-80AD Instruction Manual - Page 110
Scan Operation
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
10 SCAN OPERATION N Scan types Scanning searches for signals automatically and makes it easier to locate new stations for contact or listening purposes. FULL SCAN (p. 104) 495 999.990 kHz MHz Scan Jump Repeatedly scans all frequencies over the entire band. Some frequency ranges are not scanned according to the frequency coverage of the transceiver's version. SELECTED BAND SCAN Repeatedly scans all frequen- (p. 104) cies over the entire selected Band edge Band edge band. Scan Jump PROGRAMMED SCAN (p. 104) Band Scan edges Band edge xxA xxB edge Scan Jump Repeatedly scans between two user-programmed frequencies. Used for checking for frequencies within a specified range such as repeater output frequencies, etc. FREQUENCY/MEMORY SKIP FUNCTION (p. 108) Band edge Band edge Scan SKIP Jump SKIP Skips unwanted frequencies or channels that inconveniently stop scanning. This setting can be turned ON or OFF by pushing and holding [SKIP](5) in memory mode. PROGRAMMED LINK SCAN (pgs. 104, 123) Repeatedly programmed scans user-programmed frequencies selected at P-LINK items in the menu mode. The frequency skip scan function can be turned ON or OFF in VFO mode. When this function is set to ON, the specified frequencies are skipped during VFO scan. • "PSKIP" indicator appears in VFO mode. 102