Icom IC-80AD Instruction Manual - Page 31
Using the keypad
![]() |
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
D Using the keypad The frequency can be directly set via numeric keys. • If a frequency outside the frequency range is en- tered, the previously displayed frequency is automatically recalled after entering last digit. q Push [V/MHz] to select VFO mode, if nec- essary. w Enter the desired frequency via the keypad. • Entering 145.580 MHz • Entering 79.300 MHz • Changing 100 kHz and below Editing 145.580 MHz to 145.640 MHz BASIC OPERATION 4 1 Depending on the 2 tuning step setting, it may not be possible 3 to input a 1 kHz digit. 4 In this case, enter "0" as 1 kHz digit, then ro- 5 tate [DIAL] to set the 6 desired frequency. 7 8 9 10 11 12 13 14 15 • Editing to 684 kHz 16 17 18 Push to cancel numeral key input. 19 23
![](/manual_guide/products/icom-ic80ad-instruction-manual-e055bf3/31.png)
23
4
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Depending on the
tuning step setting, it
may not be possible
to input a 1 kHz digit.
In this case, enter “0”
as 1 kHz digit, then ro-
tate
[DIAL]
to set the
desired frequency.
• Entering 145.580 MHz
•
Entering
79.300 MHz
• Editing to 684 kHz
• Changing 100 kHz and below
Editing 145.580 MHz to 145.640 MHz
Push
to cancel numeral key input.
D
Using the keypad
The frequency can be directly set via numeric
keys.
•
If a frequency outside the frequency range is en-
tered, the previously displayed frequency is auto-
matically recalled after entering last digit.
q
Push
[V/MHz]
to select VFO mode, if nec-
essary.
w
Enter the desired frequency via the keypad.