Icom IC-80AD Instruction Manual - Page 82
Low-speed data communication - serial gps
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
7 DV MODE OPERATION N Low-speed data communication In addition to the digital voice communication, low-speed data communication is available. The optional OPC-1529R DATA COMMUNICATION CABLE and serial data communication software (purchase locally) are required in addition. NOTE: Turn OFF "GPS-TX" (p. 138) in advance to operate the low-speed data communication. D Connection Connect the transceiver to your PC using with the optional OPC-1529R as illustrated below. to [DATA] OPC-1529R (optional) PC 74 D Low-speed data communication application setting Configure the low-speed data communication application as follows. • Port : The same COM port number as IC-80AD's • Baud rate : 9600/4800 bps (p. 126) • Data : 8 bit • Parity : None • Stop : 1 bit • Flow control : Xon/Xoff D Low-speed data communication operation NOTE: Confirm that in AUTO, the computer controls when [PTT] is activated to send data and the user doesn't have to operate the radio. q Set the current call signs, etc. as described in "Current call sign setting" (p. 47), "Simplex operation in VFO" (p. 60) and "Repeater operation in VFO" (p. 62). w Refer to the instructions of the low-speed data communication application. e To transmit data • At the same time as your voice audio, push and hold [PTT] to transmit while sending data from the PC. Release [PTT] to receive. • Under computer control, see Transmission condition setting at right.