Icom IC-80AD Instruction Manual - Page 155
Tone frequency and DTCS code
![]() |
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
OTHER FUNCTIONS 13 N Tone frequency and DTCS code 1 D Subaudible (repeater) tone Some repeaters require subaudible tones to be accessed. Subaudible tones are superimposed over your normal signal and must be set in advance. D Tone and DTCS squelches D Setting subaudible tones for repeater or tone 2 squelch 3 q Enter "R TONE" or "C TONE" in DUP.T set mode. 4 MENU ¶ DUP.T ¶ R TONE (p. 119) 5 (Push [MENU ]), (Push [ ](2)/[ ](8), then push [ ](5).) 6 The tone squelch (CTCSS) or DTCS squelch opens only when receiving a signal containing a matching subaudible tone or DTCS code, respectively. You can silently wait for calls from group members using the same tone or code. Separate tone frequencies can be set for repeater and tone squelch/ pocket beep operation. D Reverse tone/DTCS squelch The reverse tone/DTCS squelch is convenient if you want to ignore a specific signal. The transceiver mutes the squelch when a signal with the matched tone or code is received. "T SQL-R" / "DTCS-R" is displayed when the reverse tone/ DTCS squelch is set. MENU ¶ DUP.T ¶ C TONE (p. 119) 7 w Push [ ](2) or [ ](8) to select the desired repeater or 8 CTCSS tone frequency. • Each operating band and each memory channel have indepen- 9 dent settings. 10 • See page 119 for available tone frequencies for details. e Push [ ](5) to return to DUP.T set mode, and push 11 [MENU ] to return to frequency indication. 12 13 14 15 D Pocket beep These functions use subaudible tones or DTCS codes for calling and can be used as a "common pager" to inform you that someone has called while you were away from the transceiver. Repeater tone setting CTCSS tone setting 16 17 18 19 147
![](/manual_guide/products/icom-ic80ad-instruction-manual-e055bf3/155.png)