Icom IC-80AD Instruction Manual - Page 49
Gateway repeater call sign programming GW CAL, Repeater group programming GROUP
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
DV MODE PROGRAMMING 6 Gateway repeater call sign programming (GW CAL) i Push [ ](5) to enter the gateway repeater call sign pro- gramming state. See p. 45 for gateway repeater call sign programming details. • Gateway repeater call sign programming screen is displayed. • Programmed repeater call sign is displayed and the 8th digit is automatically added or replaced to "G." o When the programmed repeater has gateway capability, push [ ](5) to exit gateway repeater setting and skip to !.2 Or when the programmed repeater has a different repeater for gateway communication, follow the next step !0. • When the repeater does not have a gateway repeater, follow the next step !0, too. !0 Program the other gateway repeater call sign, then push [ ](5) to exit the state. • Push [ ](2)/[ ](8) to select the desired character, number, symbol ('/'only) or space. • Push [ ](6)/[ ](4) to move the cursor right or left, respectively. • Up to an 8 digit call sign can be set, but 8th digit must be set to "G." • When the repeater does not have a gateway repeater, but has several link repeaters, in the same zone, assign a common name to all repeaters. (up to 7 digits). In this case, you must set the 8th digit to " "(blank). !1 Push [ ](2) or [ ](8) to select the next content (repeater group programming). Repeater group programming (GROUP) 1 The IC-80AD has a total of 10 groups (0-9). You can assign 2 and organize up 300 of repeater lists in the groups. Group selection is helpful for quick recall of the desired repeater. 3 !2 Push [ ](5) to enter the repeater group programming 4 state. 5 • Repeater group programming screen is displayed. • Selected group number appears and group indicator blinks. 6 7 8 9 !3 Push [ ](2) or [ ](8) to select the desired repeater group. 10 • Selected group number appears and group indicator blinks. 11 12 13 14 !4 Push [ ](5) to set the repeater group and exit the state. !5 Push [ ](2) or [ ](8) to select the next content (access 15 repeater setting). 16 17 18 19 41