Icom IC-80AD Instruction Manual - Page 142
Call sign edit record EDIT R, Auto gateway setting GW SET, RX call sign display RX CS
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
12 MENU SCREEN OPERATION D Call sign edit record (EDIT R) Selects call sign programming when the call sign is edited. • OFF : The edited or corrected call sign overwrites the pre-programmed channel. A different channel cannot be selected. • SEL : The edited or corrected call sign is programmed into the selected call sign memory. • AUTO : The edited or corrected call sign is programmed into a blank channel automatically. (default) D Auto gateway setting (GW SET) Turn the gateway auto set function ON or OFF for calling a specific station in DR mode. This function enables the transceiver to set the pre-programmed gateway repeater as the link repeater "RPT2" automatically. • OFF : After selecting a specific station, the transceiver sets the same RPT2 as previous time. (default) • AUTO : After selecting a specific station, the transceiver sets the pre-programmed gateway repeater as RPT2 automatically. D RX call sign display (RX CS) When a call is received, the calling station call sign can be displayed automatically. (default: AUTO) 134