Icom IC-80AD Instruction Manual - Page 68
Simplex operation in VFO
![]() |
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
7 DV MODE OPERATION N Simplex operation in VFO D Sending CQ q Set the desired frequency. (p. 23) • Select output power, if desired. (p. 27) w Set the current call sign to your own call sign. (p. 47) e Set the current UR call sign. (p. 47) UR call sign selection q Push and hold [UR](.) for 1 sec. to enter UR call sign selection mode. • Push [BAND] several times to select "GRP CQ" (CQCQCQ) "GRP UR" (UR call sign memories) and "CS" (current call sign). • DV mode is automatically selected. w Rotate [DIAL] to select "CQCQCQ." t Release [PTT] to return to receive. • The other station's call sign will be received. • Received call signs can be stored into the received call record automatically. See page 49 for details. • Current call sign setting example (Simplex CQ) CQ My call signɿ JA3YUA UR MY R1: (NOT USE) R2: (NOT USE) e Push [UR](.) to return to frequency indication mode. r Push and hold [PTT] to transmit and speak into the microphone at normal voice level. • Tx/Rx indicator lights red and the RF meter shows the output power. • "CQCQCQ" is displayed and scrolled in sequence on the frequency display depending on "TX CS" setting (p. 135). 60 Confirmation q Push and hold [CS](9) for 1 sec. to enter the current call sign mode. • Current UR call sign is displayed. w Push [ ](2) or [ ](8) to select and confirm the other current call sign. • ("UR"), "R1," "R2" and "MY" appears in sequence.
![](/manual_guide/products/icom-ic80ad-instruction-manual-e055bf3/68.png)