Icom IC-80AD Instruction Manual - Page 56
Receiving a D-STAR repeater
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
7 DV MODE OPERATION D Confirming current call sign q Push and hold [CS](9) for 1 sec. to enter the current call sign mode. • Current UR call sign is displayed. Appears momentarily w Push [ ](2) or [ ](8) to select and confirm the other cur- rent call sign. • ("UR"), "R1," "R2" and "MY" appears in sequence. • When repeater call sign is selected, push and hold [CS](9) for 1 sec. to toggle the call sign and repeater name indications. When changing the call sign qPush [ ](5) to enter the call sign selection mode. wPush [ ](2) or [ ](8) to select the desired call sign, then push [ ](5). • When "UR," "R1" or "R2" is selected, push [BAND] several times to select the repeater call sign groups. e Push [CS](9) again to return to frequency indication. 48 N Receiving a D-STAR repeater When the IC-80AD receives a signal from a D-STAR repeater, it receives four call sign: caller's call sign, called call sign, repeater call sign 1 (the repeater that caller accessed), and repeater call sign 2 (the liked repeater). You can copy the received call signs to current call signs, and you can also reply to a call. 444.700 MHz Repeater 444.700 MHz 449.700 MHz 449.700 MHz Uplink (transmitting freq.) Downlink (receiving freq.) Station A Station B • Presetting q Set the desired repeater frequency. (p. 23) • Select output power, if desired. (p. 27) w Set the shift direction of the transmit frequency. (DUP- or DUP; see p. 31 for details.) • When the auto repeater function is in use (U.S.A. and Korean versions only), this selection is not necessary. (p. 32) e Select DV mode. (p. 25) r When signal is received, display indicates received call sign. See next page for information about received call signs.