Icom IC-80AD Instruction Manual - Page 38
Checking the repeater input signal, Off band indication
![]() |
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
5 REPEATER AND DUPLEX OPERATIONS D Checking the repeater input signal The transceiver can check whether the other station's transmit signal can be received directly or not, by listening on the repeater input frequency. ± Push and hold [SQL] to check whether the other station's transmit signal can be received directly or not. • When the other station's signal can be directly received, move to a non-repeater frequency to use simplex. (duplex OFF) Indication while receiving Push and hold Receives -0.6 MHz shift frequency Blinks while pushing and holding [SQL] D Off band indication If the transmit frequency is out of the amateur band, the off band indication, "OFF," appears on the display when [PTT] is pushed. Check the offset frequency or duplex direction in this case. (p. 31) U.S.A. and Korean versions: Auto repeater function uses standard values of the offset frequency. CONVENIENT! Tone scan function: When you don't know the subaudible tone used for a repeater, the tone scan is convenient for detecting the tone frequency. ± Push and hold [T.SCAN](9) for 1 sec. to start the tone scan. See p. 152 for more information. 30
![](/manual_guide/products/icom-ic80ad-instruction-manual-e055bf3/38.png)