Icom IC-80AD Instruction Manual - Page 41
Hz tone
![]() |
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
5 REPEATER AND DUPLEX OPERATIONS N 1750 Hz tone To access some European repeaters, the transceiver must transmit a 1750 Hz tone burst. For such European repeaters, perform the following. • This tone can be use as a 'Call signal' in countries out of Europe. q Push and hold [DTMF.M](0) for 1 sec. to select DTMF memory. w Push [ ](8) several times (or rotate [DIAL] counter-clockwise) until "T-CALL" appears. 1 e Push [ ](5) to set. 2 r Push [V/MHz] to exit DTMF memory. 3 t Set the receive frequency (repeater output frequency). y Set the shift direction of the transmit frequency. (-DUP or 4 +DUP; see p. 31 for details.) 5 u While pushing [PTT], push [SQL] to transmit a 1750 Hz tone burst signal. 6 • If "OFF" appears, check the offset frequency or shift direction. 7 (p. 31) • The displayed frequency automatically changes to the transmit 8 frequency (repeater input frequency). i Push and hold [PTT] to transmit. 9 o Release [PTT] to receive. 10 !0 Push and hold [SQL] to check whether the other station's transmit signal can be received directly or not, by listening 11 on the repeater input frequency. 12 13 14 15 16 17 18 19 33
![](/manual_guide/products/icom-ic80ad-instruction-manual-e055bf3/41.png)