Icom IC-80AD Instruction Manual - Page 109
Erasing/transferring bank contents
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
9 MEMORY/CALL CHANNELS N Erasing/transferring bank contents The bank contents of programmed memory channels can be cleared or reassigned to another memory bank. INFORMATION: Even if the memory bank contents are cleared, the memory channel contents still remain programmed. e Push [ ](2) or [ ](8) several times to select "BANK." q Select the desired bank contents to be transferred or erased from the bank. (p. 96) ± Push [BAND] to enter memory bank selection state. ± Rotate [DIAL] to select the desired memory bank group, then push [BAND]. ± Rotate [DIAL] to select the bank channel. [DIAL] r Push [ ](6) to select the bank channels selection or push [ ](4) to select the bank group selection to be trans- ferred. t Rotate [DIAL] to select the desired bank group or channel. • Select "- - - -" indication when erasing the contents from the bank. [DIAL] To transfer the bank contents to ch 11 in Bank B. w Push [S.MW](M/CALL) for 1 sec. to enter select memory write mode. • 1 short and 1 long beeps sound. • Displays the original memory channel number automatically, and then " " indication and memory channel number blink. • Do not hold [S.MW](M/CALL) for more than 2 sec., otherwise the memory contents will be copied to VFO. Bank channel is displayed. To erase is displayed. y Push [S.MW](M/CALL) for 1 sec. to erase/transfer the bank contents. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 101