Icom IC-80AD Instruction Manual - Page 55
Dv Mode Operation
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
7 DV MODE OPERATION N Digital mode operation The IC-80AD can be operated in digital voice mode and lowspeed data operation for both transmit and receive. It can also be connected to a GPS receiver (compatible with an RS232 output/NMEA format/4800 bps/9600 bps) to transmit/receive position data. N Current call sign setting Set the current call sign for DV operation as follows. q Enter "CALL-S" in MENU screen. MENU ¶ CALL-S (Push [MENU ]), (Push [ ](2)/[ ](8), then push [ ](5).) • Call sign screen is displayed. w Push [ ](2) or [ ](8) to select the desired call sign group, "UR," "RPT1," "RPT2" or "MY," then push [ ](5). • Current call sign is displayed. Quick entry 1 Push and hold [CS](9) for 1 sec. to enter the current call 2 sign mode. See next page for details. 3 • Call sign group UR : Station call signs (U01-U60), "CQCQCQ" (U--) or 4 repeater CQ* (R-L) can be selected. 5 * '/' plus repeater call sign (R-L), '/' stands for "CQCQCQ" RPT1 : "NOTUSE"* (R--) or repeater call signs (R-L) can be 6 selected. 7 * Direct communication (NOT USE repeater) RPT2 : "NOTUSE"* (R--) or repeater call signs (R-L) can be 8 selected. 9 * Direct communication or using area repeater only (NOT USE link repeater) 10 MY : My call signs (MY1-MY6) can be selected. 11 e Push [ ](2) or [ ](8) to select the desired call sign. 12 Or push [ ](6) to enter the current call sign programming state (pgs. 36-38). 13 • When "UR," "RPT1" or "RPT2" is selected at step w, push [BAND] several times to select the repeater call sign groups. 14 • When repeater call sign is selected, push and hold [CS](9) for 1 15 sec. to toggle the call sign and repeater name indications. r Push [ ](5) to set the selected call sign to the current call 16 sign and exit the state. 17 t Repeat steps w to r to set the other current call sign. y Push [MENU ] to return to frequency indication. 18 19 47