Icom IC-80AD Instruction Manual - Page 130
Scan resume timer RESUME, Weather alert WX-ALT, Memory bank link function B-LINK
![]() |
View all Icom IC-80AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
12 MENU SCREEN OPERATION D Scan resume timer (RESUME) Selects the scan resume time from a pause after the received signal disappears. • 0 SEC : Scan resumes immediately after the received signal disappears. • 1-5 SEC : Scan pauses 1-5 sec. after the received signal disappears. (default: 2 sec.) • HOLD : Scan remains paused on the received signal according to the scan pause timer even if it disappears. Rotate [DIAL] to resume manually. D Memory bank link function (B-LINK) Sets the memory bank link function ON (default) and OFF. The link function provides continuous bank scan, scanning all channels in the selected banks during bank scan. • Bank link setting q Push [ ](2) or [ ](8) to select the bank that you want to change the link setting. Scan resume timer must be set shorter than scan pause timer (previous item), otherwise this timer cannot be activated. D Weather alert (WX-ALT) U.S.A. version only Turns weather alert function ON and OFF. (p. 155) (default: OFF) w Push [ ](5) to enter bank setting. e Push [ ](2) or [ ](8) to select the setting. r Push [ ](5) to set and return to the BANK selection screen. t Push [ ](2) or [ ](8) to select next bank and repeat steps w to r, or push [MENU ] to exit MENU screen operation. 122
![](/manual_guide/products/icom-ic80ad-instruction-manual-e055bf3/130.png)