Lenovo ThinkPad 390X User's Reference for ThinkPad 390 - Page 70
Replacing the UltraBay FX Device, Swapping UltraBay FX Devices, Fn+F4, Attention
View all Lenovo ThinkPad 390X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Replacing the UltraBay FX Device Replacing the UltraBay FX Device You can install the following drives and devices in the UltraBay FX: CD-ROM drive/diskette drive Second battery pack Second hard disk drive Note: UltraBay FX device options can be purchased through your IBM reseller or IBM marketing representative. Swapping UltraBay FX Devices You can warm swap the CD-ROM drive/diskette drive into and out of the UltraBay FX. Warm swap means to remove or reconnect a device when the computer is in suspend mode. Warm swap is only available under the Windows 98 or Windows 95 OSR2 operating system; otherwise, turn off your computer before swapping the CD-ROM drive/diskette drive. You can hot swap the battery pack into the UltraBay FX when the AC Adapter supplies the computer with power. To swap a second hard disk drive, you need to power off the computer. Note: Do not swap UltraBay FX devices if the computer is in hibernation mode. To swap UltraBay FX devices, do the following: 1. If the computer power is on, do any of the following: press Fn+F4 to place the computer in suspend mode power off the computer The bay LED turns off. Attention: Make sure that the bay LED is off. Never remove the UltraBay FX device when the bay LED is on. 54 ThinkPad 390 User's Reference