Lenovo ThinkServer RD210 Hardware Maintenance Manual - Page 101
Insert the SAS/SATA controller
View all Lenovo ThinkServer RD210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
1 USB embedded connector 2 RAID controller connector 3 Riser card error LED 4 SAS/SATA RAID riser card 6. Insert the SAS/SATA controller 2 into the connector on the SAS/SATA RAID riser card assembly 1 until it is firmly seated. Attention: Incomplete insertion might cause damage to the server or the controller. 000000 0 000000 0 000000 0 000000 000000 7. Tilt the SAS/SATA RAID riser-card assembly slightly and insert the end of the adapter in the slot on the retention bracket as shown in the following illustration. Make sure that the SAS/SATA RAID riser-card assembly keys align correctly with the connector on the system board and press down on the assembly until it is seated firmly into the connector on the system board. Chapter 7. Installing optional devices and replacing customer replaceable units 93