Lenovo ThinkServer RD210 Hardware Maintenance Manual - Page 64
Replace the cable if it is damaged., For additional troubleshooting information, see
![]() |
View all Lenovo ThinkServer RD210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Table 3. DSA Preboot messages (continued) • Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. • See Chapter 9 "Parts listing, ThinkServer RD210 Type 3795, 3796, 3818, and 3819" on page 143 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). • If an action step is preceded by "(Trained service technician only)," that step must be performed only by a Trained service technician. • Go to the Lenovo support Web site at http://www.lenovo.com/support to check for technical information, hints, tips, and new device drivers or to submit a request for information. Message number Component Test State Description Action 215-903-xxx Optical Drive • Verify Aborted Could not Media access the Installed drive. • Read/ Write Test • Self-Test Messages and actions apply to all three tests. 1. Insert a CD/DVD into the drive or try a new media, and wait for 15 seconds. 2. Run the test again. 3. Check the drive cabling at both ends for loose or broken connections or damage to the cable. Replace the cable if it is damaged. 4. Run the test again. 5. Make sure that the DSA code is at the latest level. For the latest level of DSA code, go to http://www.lenovo.com/support. 6. Run the test again. 7. For additional troubleshooting information,see the Installation and User Guide. 8. Run the test again. 9. Replace the CD/DVD drive. 10. If the failure remains, go to http://www.lenovo.com/support for more troubleshooting information. 215-904-xxx Optical Drive • Verify Failed Media Installed • Read/ Write Test • Self-Test Messages and actions apply to all three tests. A read error occurred. 1. Insert a CD/DVD into the drive or try a new media, and wait for 15 seconds. 2. Run the test again. 3. Check the drive cabling at both ends for loose or broken connections or damage to the cable. Replace the cable if it is damaged. 4. Run the test again. 5. For additional troubleshooting information, see the Installation and User Guide. 6. Run the test again. 7. Replace the CD/DVD drive. 8. If the failure remains, go to http://www.lenovo.com/support for more troubleshooting information. 56 ThinkServer RD210 Hardware Maintenance Manual
![](/manual_guide/products/lenovo-rd210-hardware-maintenance-manual-0f207c1/64.png)