Lenovo ThinkServer RD210 Hardware Maintenance Manual - Page 131
Removing and installing the PCI riser-card bracket from the riser card
View all Lenovo ThinkServer RD210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
7. Lower the adapter onto the connector and press it firmly into the connector on the system board until it is seated firmly. 8. Reinstall the PCI riser-card assembly in PCI riser connector 1 (see "Removing and installing a PCI riser-card assembly" on page 81). 9. Replace the cover (see "Removing and replacing the cover" on page 72). 10. Slide the server into the rack. 11. Reconnect the power cord and any cables that you removed. 12. Turn on the peripheral devices and the server. Removing and installing the PCI riser-card bracket from the riser card To remove and install the PCI riser-card bracket from the riser card, complete the steps in this section. Removing the PCI riser-card bracket from the riser card To remove the PCI riser-card bracket from the riser-card, complete the following steps: 1. Read the safety information in Chapter 2 "Safety information" on page 3 and "Installation guidelines" on page 67. 2. Turn off the server and peripheral devices and disconnect all power cords. 3. Remove the cover (see "Removing and replacing the cover" on page 72). 4. Remove the PCI riser-card assembly from PCI riser connector 1 (see "Removing and installing a PCI riser-card assembly" on page 81). 5. Press the retention tabs away from the adapter. 6. Remove the screw that attaches the PCI riser card to the PCI bracket. 1 PCI riser-card bracket 2 Screw 3 PCI riser-card 7. If you are instructed to return the PCI bracket, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you. Installing the PCI riser- card bracket from the riser card To install the PCI riser-card bracket to the riser card, complete the following steps: Chapter 7. Installing optional devices and replacing customer replaceable units 123