Lenovo ThinkServer RD210 Hardware Maintenance Manual - Page 128
Installing the virtual media key, Remove the cover see Removing and replacing the cover
![]() |
View all Lenovo ThinkServer RD210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
1 Virtual media key (front) 2 Mounting bracket (rear) 3 Mounting tab 4 Virtual media key connector 5. If you are instructed to return the virtual media key, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you. Installing the virtual media key To install the virtual media key, complete the following steps: 1. Read the safety information in Chapter 2 "Safety information" on page 3 and "Installation guidelines" on page 67. 2. Remove the cover (see "Removing and replacing the cover" on page 72). 3. Align the virtual media key with the mounting tab and slide it down the tab onto the connector on the system board. Press the virtual media key down into the connector until it is firmly seated on the system board. 120 ThinkServer RD210 Hardware Maintenance Manual
![](/manual_guide/products/lenovo-rd210-hardware-maintenance-manual-0f207c1/128.png)