Lexmark X500n Service Manual - Page 114
Engine maintenance, Mono Compression Setting, Modem Settings, RX Level, Cable Equalizer
View all Lexmark X500n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
7100-XXX Lexmark confidential until announce edited 1/4/2007 Engine maintenance This submenu shows the replacement status of the various maintenance items on the MFP. From the top level of the Maintenance mode menu, use the and keys to navigate to Engine Maintenance. Press to select the Engine Maintenance item. Use the and keys to navigate to the individual settings in the Engine Maintenance menu. Press to select the currently displayed item. Replace OPC Belt Replace Fuser Replace TR Belt Replace PQ Kit Replace PF1 Kit Replace PF2 Kit Replace ADF Kit Waste Toner Pack Life Setting - To change the status of any item, use the key to scroll to the desired setting and press the key. Press twice to return to the top level of the Maintenance mode menu. Scan Maintenance Mono Compression Setting - This item lets you change the scan compression settings. The options are MH, MR, and MMR. MH is the default setting. This is the only item in the Scan Maintenance menu. Fax Maintenance Modem Settings The three modem settings submenu items can be accessed using the and keys to navigate to the individual settings. When the desired modem setting is displayed, press to select the item. RX Level --This item allows you to adjust the RX level. The options are 16, 26, 33, and 43 dBm. XXX is the default. This setting is automatically set when the MFP is initialized at setup. Do not change this setting without second-level support supervision. If the setting needs to be adjusted use the and keys to navigate to the setting level, and press to select the new setting. Press to exit. TX Level - This item allows you to adjust the TX level. The options are 0 to 15 dBm. 15 dBm is the default. This setting is automatically set when the MFP is initialized at setup. Do not change this setting without second-level support supervision. If the setting needs to be adjusted, use the and keys to navigate to the setting level, and press to select the new setting. Press to exit. Cable Equalizer - This setting affect signal attenuation distance and the physical distance the fax can be from a repeater. The options available for this setting are 0 km, 1.8 km, 3.6 km, and 7.2 km. Do not change this setting. If the setting needs to be adjusted, use the and keys to navigate to the setting level, and press to select the new setting. Press to exit. 3-6 Service Manual