Lexmark X500n Service Manual - Page 44

7100-XXX User status messages Message Tray (1, 2) Missing Toner Low (C,M,Y,K) Sleep Please Wait READY PC Printing Calibrating Connected to Server Sending File... Send E-mail Notification Connection Fail No Response Busy Dial Failed Scanning Page Job # Dialing Awaiting Re dial Transmitting Receiving Description Action The upper or lower tray is install the upper or lower tray. If the problem missing. persists, see "Paper tray missing service check" on page 2-30. The toner is low in the cartridge indicated. See "Toner low/empty service check" on page 2-31. The MFP is idle. These are the normal operating modes. The MFP is warming up. The MFP is ready to perform a task. The MFP is printing. The MFP is calibrating. The MFP is connected to a server for a push scan job. A scan job is being transmitted. An e-mail is being sent to a user notifying them of a push scan job being completed. Unable to connect to the remote fax. The device The remote fax device is currently busy. The dial attempt to another device failed. The scanner is scanning in the flatbed or ADF. Fax Job # is being processed. A fax number is being dialed. The fax is between dialing attempts. The fax is transmitting data to another fax device. The X502 is receiving fax data from a remote fax device. 2-6 Service Manual