NEC e616 User Guide - Page 173
Alarm clock, To Set an Alarm
View all NEC e616 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Alarm clock (press "MENU" key → select "Toolbox" → select "Alarm clock") You can use e616 as your alarm clock which rings and vibrates at a specific time. To Set an Alarm You can set up to 5 alarm times. You can set a recurring alarm to ring at a specific time on several days of week. To Do this 1 Select an alarm entry Select the alarm clock to set from Alarm 1 to Alarm 5 and press the Enter key, or press the SK1 (Edit) key. The alarm setting screen is displayed. 2 Set time Set time in 24 hour clock, and press the Enter key. 3 Set repeat setting 4 Enter pop-up contents 5 Set clock alarm tune 6 Set clock alarm volume Select one of the following cycles and press the Enter key: Do not repeat, or Weekly. Do not repeat indicates the alarm is non-recurring. Note : If you Disable the alarm entry when Do not repeat is selected, the alarm goes off in spite of Disable status. After the alarm goes off, the entry is put in the Off status. See Enable the set alarm below. Weekly is used to set days of week. Select one or more days using the Enter key. Note : If you Disable the alarm entry when Weekly is selected, the alarm entry will put in the Enable status after the set alarm time elapse without making the alarm go off. See Enable the set alarm below. Enter contents (up to 32 single-byte characters) to be displayed in the pop-up window on the set time screen, and press the Enter key. Select the tune you want and press the Enter key. You can hear the tone by selecting the tone name and pressing the SK1 (Start) key. Select the volume you want and press the Enter key. Toolbox -156-