NEC e616 User Guide - Page 53
Paste the block, Move the cursor to the paste point by using
View all NEC e616 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
To 2 Specify the cut starting point 3 Specify the cut ending point 4 Specify the paste point 5 Paste the block Do this Move the cursor to the starting point of the block to cut by using the Up, Down, Left, or Right key and press the Enter key. Note : You can cancel the specified cut starting point by pressing the C key. Move the cursor to the ending point of the block to cut by using the Up, Down, Left, or Right key and press the Enter key. The specified text is cut. Note : Maximum capacity of clip board is 1024 byte. Move the cursor to the paste point by using the Up, Down, Left, or Right key. Press the Options menu key in the text input mode, then select Paste. Repeat the steps one to four if necessary. Note : If the copied text exceeds the maximum number of characters allowed in the field, the message asking whether you want to discard the remaining characters or cancel the paste operation. Text Entry -36-