Netgear GS728TXS GS728TXS/GS752TXS Software Administration Manual - Page 101

GS752TXS and GS728TXS Smart Switches LACP Configuration The LACP configuration screen is used to set the LACP system priority.  To configure LACP: 1. Select Switching LAG  Advanced  LACP Configuration. 2. From the LACP System Priority field, specify the device's link aggregation priority relative to the devices at the other ends of the links on which link aggregation is enabled. A higher value indicates a lower priority. You can change the value of the parameter globally by specifying a priority from 1-65535 The default value is 32768. 3. Click Apply. LACP Port Configuration The LACP port configuration screen is used to configure the LACP priority value for the selected port and the administrative LACP Timeout value.  To configure LACP port priority settings: 1. Select Switching LAG  Advanced  LACP Port Configuration. 2. Select the port(s) to configure: • To configure a single port, select the check box associated with it, or type the port number in the Go To Interface field and click Go. • To configure multiple ports with the same settings, select the check box associated with each port to configure. • To configure all ports with the same settings, select the check box in the heading row. 101