Netgear GS728TXS GS728TXS/GS752TXS Software Administration Manual - Page 300

GS752TXS and GS728TXS Smart Switches criteria to a particular queue or redirect the traffic to a particular port. A default deny all rule is the last rule of every list. 2. Apply the access list to an interface in the inbound direction. The GS752TXS and GS728TXS Smart Switches allows ACLs to be bound to physical ports and LAGs.The switch software supports MAC ACLs and IP ACLs. MAC ACL Example Configuration The following example shows how to create a MAC-based ACL that permits Ethernet traffic from the Sales department on specified ports and denies all other traffic on those ports. 1. From the MAC ACL screen, create an ACL with the name Sales_ACL for the Sales department of your network (See MAC ACL on page 226). By default, this ACL will be bound on the inbound direction, which means the switch will examine traffic as it enters the port. 2. From the MAC Rules screen, create a rule for the Sales_ACL with the following settings: • ID. 1 • Action. Permit • Assign Queue. 0 • Match Every. False • CoS. 0 • Destination MAC. 01:02:1A:BC:DE:EF • Destination MAC Mask. 00:00:00:00:FF:FF • Source MAC. 02:02:1A:BC:DE:EF • Source MAC Mask. 00:00:00:00:FF:FF • VLAN ID. 2 For detailed information about MAC ACL rules, see MAC Rules on page 227. 3. From the MAC Binding Configuration screen, assign the Sales_ACL to Ethernet ports 6, 7, and 8, and then click Apply (See MAC Binding Configuration on page 229). 300