Netgear GS728TXS GS728TXS/GS752TXS Software Administration Manual - Page 306
Destination IP Address, Destination L4 Port
View all Netgear GS728TXS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 306 highlights
GS752TXS and GS728TXS Smart Switches • Source Mask. 255.255.255.0 • Source L4 Port. Other, and enter 4567 as the source port value • Destination IP Address. 192.12.2.0 • Destination Mask. 255.255.255.0 • Destination L4 Port. Other, and enter 4568 as the destination port value For more information about this screen, see Class Configuration on page 180. 4. Click Apply. 5. From the Policy Configuration screen, create a new policy with the following settings: • Policy Selector. Policy1 • Member Class. Class1 For more information about this screen, see Policy Configuration on page 184. 6. Click Add to add the new policy. 7. Click the Policy1 hyperlink to view the Policy Class Configuration screen for this policy. 8. Configure the Policy attributes as follows: • Assign Queue. 3 • Policy Attribute. Simple Policy • Color Mode. Color Blind • Committed Rate. 1000000 Kbps • Committed Burst Size. 128 KB • Confirm Action. Send • Violate Action. Drop For additional information about this screen, see Policy Configuration on page 184. 9. From the Service Configuration screen, select the check box next to interfaces g7 and g8 to attach the policy to these interfaces, and then click Apply (See Service Configuration on page 187). All UDP packet flows destined to the 192.12.2.0 network with an IP source address from the 192.12.1.0 network that have a Layer 4 Source port of 4567 and Destination port of 4568 from this switch on ports 7 and 8 are assigned to hardware queue 3. On this network, traffic from streaming applications uses UDP port 4567 as the source and 4568 as the destination. This real-time traffic is time sensitive, so it is assigned to a high-priority hardware queue. By default, data traffic uses hardware queue 0, which is designated as a best-effort queue. Also the confirmed action on this flow is to send the packets with a committed rate of 1,000,000 Kbps and burst size of 128 KB. Packets that violate the committed rate and burst size are dropped. 306