Netgear GS728TXS GS728TXS/GS752TXS Software Administration Manual - Page 190

GS752TXS and GS728TXS Smart Switches 2. Specify the current password in the Old Password field. The entered password will be displayed in asterisks (*). Passwords are 1-20 alphanumeric characters in length and are case sensitive. 3. Enter the new password. It will not display as it is typed, and only asterisks (*) will show on the screen. Passwords are 1-20 alphanumeric characters in length and are case sensitive. 4. To confirm the password, enter it again to make sure you entered it correctly. This field will not display, but will show asterisks (*) 5. Click Apply.  To reset the password to the default value: 6. Select the Reset Password check box. 7. Click Apply. Note: In you have forgotten the password and are unable to log in to the switch management interface, press the Factory Defaults button on the front panel of the switch for more than one second. The device reboots, and all switch settings, including the password, are reset to the factory default values. If you press the reset button for less than one second, the switch reboots, but the switch loads the saved configuration. 190