Netgear GS728TXS GS728TXS/GS752TXS Software Administration Manual - Page 118
STP Configuration, To con STP settings on the switch, Switching, Basic, Configuration Name
View all Netgear GS728TXS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
GS752TXS and GS728TXS Smart Switches • STP Statistics STP Configuration The STP Configuration screen contains fields for enabling STP on the switch. To configure STP settings on the switch: 1. Select Switching STP Basic STP Configuration. 2. From the Spanning Tree State field, specify whether to enable or disable Spanning Tree operation on the switch. 3. From the STP Operation Mode field, specify the Force Protocol Version parameter for the switch. Options are: • STP (Spanning Tree Protocol). IEEE 802.1D • RSTP (Rapid Spanning Tree Protocol). IEEE 802.1w • MSTP (Multiple Spanning Tree Protocol). IEEE 802.1s 4. Specify the configuration name and revision level. • Configuration Name. Name used to identify the configuration currently being used. It can be up to 32 alphanumeric characters. • Configuration Revision Level. Number used to identify the configuration currently being used. The values allowed are between 0 and 65535. The default value is 0. 118