Netgear GS728TXS GS728TXS/GS752TXS Software Administration Manual - Page 41

GS752TXS and GS728TXS Smart Switches Table 7. Time Configuration status fields (Continued) Field Description Reference Clock Id Specifies the reference clock identifier of the server for the last received valid packet. Server Mode Specifies the mode of the server for the last received valid packet. Unicast Sever Max Entries Specifies the maximum number of unicast server entries that can be configured on this client. Unicast Server Current Entries Specifies the number of current valid unicast server entries configured for this client. Click Refresh to refresh the screen with the most current data from the switch. SNTP Server Configuration Use the SNTP Server Configuration screen to view and modify information for adding and modifying Simple Network Time Protocol SNTP servers.  To configure a new SNTP server: 1. Select System  Management  Time  SNTP Server Configuration. The SNTP Server Configuration screen displays. 2. From the Server Type list, select the type of SNTP address to enter in the Address field, which is either an IP address (IPv4) or hostname (DNS). 3. Under the Address field, specify the IP address or the host name of the SNTP server. 4. If the UDP port on the SNTP server to which SNTP requests are sent is not the standard port (123), specify the port number. 5. Under the Priority field, specify the order in which to query the servers. The SNTP client on the device continues sending SNTP requests to different servers until a successful response is received or all servers are exhausted. The request is sent to an SNTP server with a priority value of 1 first, then to a server with a priority value of 2, and so on. If more than one server has the same priority, the SNTP client contacts the servers in the order that they appear in the table. 41