Netgear GS728TXS GS728TXS/GS752TXS Software Administration Manual - Page 222
Protected Ports Membership, To con protected ports, Security, Traffic Control, Protected Ports
View all Netgear GS728TXS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
GS752TXS and GS728TXS Smart Switches The Dynamic MAC Address Table shows the MAC addresses and their associated VLANs learned on the selected port. Use the Port List menu to select the interface for which you want to display data. Table 33. Dynamic MAC address table information Field VLAN ID MAC Address Description Displays the VLAN ID corresponding to the Last Violation MAC address. Displays the MAC addresses learned on a specific port. Protected Ports Membership If a port is configured as protected, it does not forward traffic to any other protected port on the switch, but it will forward traffic to unprotected ports. Use the Protected Ports Membership screen to configure the ports as protected or unprotected. To configure protected ports: 1. Select Security Traffic Control Protected Ports. 2. Click the orange bar to display the available ports. 3. Click the box below each port to configure as a protected port. Protected ports are marked with a check mark. No traffic forwarding is possible between two protected ports. 4. Click Apply. 222