Netgear GS728TXS GS728TXS/GS752TXS Software Administration Manual - Page 121

GS752TXS and GS728TXS Smart Switches 3. Click Apply. 4. View the MSTP status information displayed on the Spanning Tree CST Configuration screen. Field Description MST ID Table consisting of the MST instances (including the CST) and the corresponding VLAN IDs associated with each of them. VID Table consisting of the VLAN IDs and the corresponding FID associated with each of them FID Table consisting of the FIDs and the corresponding VLAN IDs associated with each of them. 5. Click Refresh to update the information on the screen with the most current data. CST Port Configuration Use the CST Port Configuration screen to configure Common Spanning Tree (CST) and Internal Spanning Tree on a specific port on the switch.  To configure CST port settings: 1. Select Switching  STP  Advanced  CST Port Configuration. 2. To configure CST settings for a physical port, enter the interface and click Go to select that particular interface. 3. Select the interfaces for which you want to configure the CST settings: • To configure CST settings for a Link Aggregation Group (LAG), click LAGS. • To configure CST settings for both physical ports and LAGs, click ALL. 4. Select the check box next to the port or LAG to configure. You can select multiple ports and LAGs to apply the same setting to the selected interfaces. Select the check box in the heading row to apply the same settings to all interfaces. 5. Configure the CST values for the selected port(s) or LAG(s): 121