Netgear GS728TXS GS728TXS/GS752TXS Software Administration Manual - Page 197
TACACS+ Server Configuration, To con TACACS+ server, Security, Management Security, TACACS
View all Netgear GS728TXS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
GS752TXS and GS728TXS Smart Switches TACACS+ Server Configuration Use the TACACS+ Server Configuration screen to configure up to five TACACS+ servers with which the switch can communicate. To configure TACACS+ server: 1. Select Security Management Security > TACACS+ Server Configuration. 2. In the TACACS Server field, specify the IP address of the TACACS server. Note: The Add option is available if fewer than five TACACS+ servers are configured on the system, and the Server Address field is only available when Add is selected in the TACACS+ Server IP Address field. After you add one or more TACACS+ servers, additional fields appear on the TACACS+ Server Configuration screen. 3. In the Priority field, specify the order in which the TACACS+ servers are used. A value of 0 is the highest priority. The valid range is 0-65535. 4. In the Port field, specify the authentication port number through which the TACACS+ session occurs. The default is port 49, and the range is 0-65535. 5. In the Key String field, specify the authentication and encryption key for TACACS+ communications between the GS752TXS/GS728TXS and the TACACS+ server. This key must match the encryption used on the TACACS+ server. The valid range is 0-128 characters. 6. In the Connection Timeout field, specify the amount of time that passes before the connection between the device and the TACACS+ server times out. The field range is from 1 to 30 seconds. 7. Click Apply. 197