Netgear GS728TXS GS728TXS/GS752TXS Software Administration Manual - Page 149
Querier VLAN Configuration, Apply, To con MLD queriers, Switching, Multicast
View all Netgear GS728TXS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
GS752TXS and GS728TXS Smart Switches 4. In the MLD Version field, the MLD protocol version used in periodic MLD queries is displayed. The supported MLD Version is 1. 5. In the Query Interval field, specify the time interval in seconds between periodic queries sent by the snooping querier. The Query Interval must be a value in the range of 1-1800 seconds. The default value is 60. 6. In the Querier Expiry Interval field, specify the time interval in seconds after which the last querier information is removed. The Querier Expiry Interval must be a value in the range of 60-300 seconds. The default value is 60. 7. Click Apply. Querier VLAN Configuration Use this screen to configure MLD queriers for use with VLANs on the network. To configure MLD queriers: 1. Select Switching Multicast MLD Snooping Querier Querier VLAN Configuration. 2. Under VLAN ID, specify the VLAN ID for which the MLD Snooping Querier is to be enabled. 3. From the Querier Election Participate Mode list, select the mode: • Disable. Upon seeing another querier of the same version in the VLAN, the snooping querier moves to the non-querier state. • Enable. The snooping querier participates in querier election, in which the least IP address operates as the querier in that VLAN. The other querier moves to non-querier state. 4. Under Snooping Querier VLAN Address, specify the snooping querier IP address to be used as the source address in periodic MLD queries sent on the specified VLAN. 5. Click Add. 6. View the status information described in the following table. 149