Netgear GS728TXS GS728TXS/GS752TXS Software Administration Manual - Page 16
you lose your connection to the rest of the network. Be sure
View all Netgear GS728TXS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
GS752TXS and GS728TXS Smart Switches 5. Select Use the following IP address and set the IP address of the administrative system to an address in the 192.168.0.0 network, such as 192.168.0.200. The IP address must be different from that of the switch but within the same subnet. WARNING: When you change the IP address of your administrative system, you lose your connection to the rest of the network. Be sure to write down your current network address settings before you change them. 6. Click OK. To configure a static address on the switch: 1. Use a straight-through cable to connect the Ethernet port on the administrative system directly to any port on the GS752TXS/GS728TXS. 2. Open a web browser on your computer and connect to the management interface. For more information, see Access the Management Interface from a Web Browser on page 17. 3. Change the network settings on the switch to match those of your network. For more information, see IP Configuration on page 33. After you change the network settings on the switch, return the network configuration on your administrative system to the original settings. 16