Netgear GS728TXS GS728TXS/GS752TXS Software Administration Manual - Page 175
Queue ID, Minimum Bandwidth, Scheduler Type, Weighted, Strict
View all Netgear GS728TXS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
GS752TXS and GS728TXS Smart Switches 2. To configure CoS queue settings for a physical port, enter the interface and click Go to select that particular interface. 3. Select the interfaces for which you want to configure the interface queue settings: • To configure CoS settings for a Link Aggregation Group (LAG), click LAGS. • To configure CoS settings for both physical ports and LAGs, click ALL. 4. Select the check box next to the port or LAG to configure. You can select multiple ports and LAGs to apply the same setting to the selected interfaces. Select the check box in the heading row to apply a trust mode or rate to all interfaces. 5. Configure any of the following settings: • Queue ID. Use the menu to select the queue to be configured. • Minimum Bandwidth. Enter a percentage of the maximum negotiated bandwidth for the selected queue on the interface. Specify a percentage from 0-100, in increments of 1. • Scheduler Type. Selects the type of queue processing from the drop-down menu. Options are Weighted and Strict. Defining on a per-queue basis allows the user to create the desired service characteristics for different types of traffic. - Weighted. Weighted round robin associates a weight to each queue. This is the default. - Strict. Services traffic with the highest priority on a queue first. 175