Netgear GS728TXS GS728TXS/GS752TXS Software Administration Manual - Page 62
LLDP Configuration, System > LLDP > Basic > LLDP Configuration
View all Netgear GS728TXS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
GS752TXS and GS728TXS Smart Switches LLDP Configuration Use the LLDP Configuration screen to specify the global LLDP and LLDP-MED parameters that are applied to the switch. To configure global LLDP settings: 1. Select System > LLDP > Basic > LLDP Configuration. The LLDP Configuration screen displays. 2. Optionally, configure non default values for the following LLDP properties. • TLV Advertised Interval: The number of seconds between transmissions of LLDP advertisements. • Hold Multiplier: The Transmit Interval multiplier value, where Transmit Hold Multiplier × Transmit Interval = the time to live (TTL) value the device advertises to neighbors. • Reinitializing Delay: The number of seconds to wait before attempting to reinitialize LLDP on a port after the LLDP operating mode on the port changes. • Transmit Delay: The minimum number of seconds to wait between transmissions of remote data change notifications to the SNMP trap receiver(s) configured on the device. 3. Optionally, configure a non-default value next to Fast Start Duration. This value sets the number of LLDP packets sent when the LLDP-MED Fast Start mechanism is initialized, which occurs when a new endpoint device links with the LLDP-MED network connectivity device. 4. Click Apply. 62