Netgear GS728TXS GS728TXS/GS752TXS Software Administration Manual - Page 49
Green Ethernet, To con the Green Ethernet Interface settings
View all Netgear GS728TXS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
GS752TXS and GS728TXS Smart Switches Green Ethernet Use this screen to configure Green Ethernet features. Using the Green Ethernet Configuration features allows for power consumption savings. To configure the Green Ethernet settings: 1. Select System Management Green Ethernet Green Ethernet Configuration. The Green Ethernet Configuration screen displays. 2. Enable or disable the Auto Power Down Mode. • Enable. When the port link is down, the PHY will automatically go down for a short period of time and then wake up to check link pulses. This allows the port to continue to perform auto-negotiation while consuming less power when no link partner is present. • Disable. Provide full power to the PHY even if the port link is down. 3. Enable or disable the Short Cable Mode. • Enable. When the port link is up at 1 Gbps speed, the cable length test is performed, and if the length of the cable is