Netgear GS728TXS GS728TXS/GS752TXS Software Administration Manual - Page 258

GS752TXS and GS728TXS Smart Switches Table 39. EAP statistics (Continued) Field Description Response/ID Frames Received The number of EAP Respond ID frames that have been received on the port. Response Frames Received The number of valid EAP Response frames received on the port. Request/ID Frames Transmitted The number of EAP Requested ID frames transmitted through the port. Request Frames Transmitted The number of EAP Request frames transmitted through the port. Use the buttons at the bottom of the screen to perform the following actions: • To clear all the EAP counters for all ports on the switch, select the check box in the row heading and click Clear. The button resets all statistics for all ports to default values. • To clear the counters for a specific port, select the check box associated with the port and click Clear. • Click Refresh to refresh the data on the screen and display the most current statistics. Cable Test Use the Cable Test screen to display information about the cables connected to switch ports.  To display the cable test screen: 1. Select Monitoring  Ports > Cable Test. 2. Select whether to display physical interfaces, link aggregation groups (LAGs), or both by clicking one of the following links above the table heading: • 1 (or the unit ID of the switch). Only physical interfaces are displayed. This is the default setting. 258