Netgear GS728TXS GS728TXS/GS752TXS Software Administration Manual - Page 63

GS752TXS and GS728TXS Smart Switches LLDP Port Settings Use the LLDP Port Settings screen to specify per-interface LLDP settings.  To configure LLDP port settings: 1. Select System  LLDP  Advanced  LLDP Port Settings. The LLDP Port Settings screen displays. 2. Select the port(s) to configure. • To configure a single port, select the check box associated with it, or type the port number in the Go To Interface field and click Go. • To configure multiple ports with the same settings, select the check box associated with each port to configure. • To configure all ports with the same settings, select the check box in the heading row. 3. Use the lists to configure the LLDP settings for the selected ports: • Admin Status: Select the status for transmitting and receiving LLDP packets: • Tx Only: Enable only transmitting LLDP PDUs on the selected ports. • Rx Only: Enable only receiving LLDP PDUs on the selected ports. • Tx and Rx: Enable both transmitting and receiving LLDP PDUs on the selected ports. • Disabled: Do not transmit or receive LLDP PDUs on the selected ports. • Management IP Address: Choose whether to advertise the management IP address from the interface. The possible field values are: • Stop Advertise: Do not advertise the management IP address from the interface. • Auto Advertise: Advertise the current IP address of the device as the management IP address. • Notification: When notifications are enabled, LLDP interacts with the Trap Manager to notify subscribers of remote data change statistics. The default is Disabled. 63